Bel Canto Design eVo200.2 - Manual (Page 7)

eVo200.2 Owner's Manual Page 7
Amplifier Placement
eVo200.2 Placement Within
Your System
The most typical arrangement places the
eVo200.2 on the lower shelf of a rack or shelf
unit; some users prefer to have the eVo200.2
on its own stand.
Whichever method is preferred, it is
recommended to use a high quality type stand
capable of dissipating vibration and resonance
into the floor area.
Because the eVo200.2 runs so cool it can be
placed in many system locations without
compromise.
We do not recommend placing weights or other
objects directly on the eVo200.2. This may mar
or scratch the chassis finish. Dampen a soft
cotton cloth with warm water for cleaning the
outer surfaces.
Specifications
Power output per channel into 8 ohms • 120 watts <1% THD+N
Power output per channel into 4 ohms • 200 watts <1% THD+N
800 watts short term continuous Mono
Bandwidth: + or - 3dB • 1Hz-80KHz
Input level for full stereo output • 2 Volts RMS
Signal to Noise Ratio @ 1 watt out • >96 dB A weighted, 20 kHz
Distortion @ 1 watt / 1kHz • <0.05%
Damping Factor • >100
Input configuration and impedance • single-ended/balanced 100Kohm
Stereo Mode Gain • 26 dB
Power Requirements • 100-120 VAC 50-60 Hz or 220-240 VAC 50-60 Hz
30-1000 Watts
Dimensions • 17.5" W x 14.5" D x 4.5" H (445 mm x 368 mm x 114 mm)
Weight • 30 lbs. (13 kg)