Philips AVENT Extractor de leche manual - Manual (Page 8)

3 2
GB GB
5. Using the Manual Breast Pump
with the AVENT Feeding Bottle
Simply replace the VIA Cup and Adaptor with the AVENT
Feeding Bottle. To make the pump completely stable
insert the bottle into the funnel cover (a).
6. How to assemble the Manual
Breast Pump
Separate all parts and ensure pump has been cleaned
and sterilised as in section 3:
1) Wash your hands thoroughly. Insert the white valve (g) into the
pump body (f) from underneath.
2) Place the pump body (f) onto the VIA Adaptor (h). Twist gently
clockwise until secure. DO NOT OVERTIGHTEN !
3) Place the assembled pump body and VIA Adaptor onto the VIA
Cup (i). Twist gently clockwise until secure. DO NOT OVERTIGHTEN !
4) Place the silicone diaphragm with stem (d) into the pump body (f).
Make sure it fits securely around the rim by pressing down with
your fingers to ensure a perfect seal. (This is easier if assembled
whilst wet.)
5) Place the forked end of the handle (e) under the diaphragm stem
(d) and push down gently on the handle until it clicks into place.
6) Carefully insert the Let-down Massage Cushion (b) into the pump
funnel (f) making sure it is perfectly sealed all round the rim of
the funnel. (This is easier if assembled whilst wet.)
7) Click the pump cover (c) onto the pump body (f). To make the pump
completely stable, insert the VIA Cup into the VIA Lid/Stand (j).
2. Detailed parts guide
Manual Breast Pump
a) Funnel cover
b) Let-down Massage Cushion
c) Pump cover
d) Silicone diaphragm
and stem*
e) Handle
f) Pump body
g) White valve*
3. Cleaning and sterilisation
Before you use your breast pump for the first time and every time
before use:
Separate all parts, then wash in the dishwasher or in warm soapy
water and rinse. Do not use antibacterial or abrasive cleaners/detergents.
Sterilise in a Philips AVENT Steam Steriliser (Electronic, Electric or
Microwave), or by boiling for 5 minutes. If using
a Philips AVENT Steam Steriliser, the pump will
remain sterile in the steriliser for a minimum
of 6 hours, provided the lid is not removed.
4. Keeping your breast pump sterile
for travel
After sterilising all parts, insert the white valve (g)
and fit the diaphragm with stem (d) onto the pump
body (f). Clip the cover (a) over the funnel and
Let-down Massage Cushion (b) and screw on the
sealing base (n) in place of the VIA Cup and Adaptor.
VIA Feeding System
h) VIA Adaptor
i) VIA Cup (180ml/6oz)
j) VIA Lid/Stand
k) Dome cap
l) Extra Soft Teat, Newborn Flow (0m+)
m) Screw ring
n) Sealing base
*spares included