Faqs (frequently asked questions), Faqs – Philips 241E1SB-00 User Manual
Page 4
FAQs (Frequently Asked Questions)
FAQs (Frequently Asked Questions)
General FAQs
Q1:
When I install my monitor what should I do if the screen shows 'Cannot display this
video mode'?
A:
Recommended resolution for Philips 23.6 ": 1920x1080 @60Hz.
1.
Unplug all cables, then connect your PC to the monitor that you used
previously.
2.
In the Windows Start Menu, select Settings/Control Panel. In the Control Panel
Window, select the Display icon. Inside the Display Control Panel, select the
'Settings' tab. Under the setting tab, in box labeled 'desktop area', move the
slidebar to 1920x1080 pixels (23.6").
3.
Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK.
4.
Restart your computer and repeat step 2 and 3 to verify that your PC is set at
1920x1080@60Hz (23.6").
5.
Shut down your computer, disconnect your old monitor and reconnect your
Philips LCD monitor.
6.
Turn on your monitor and then turn on your PC.
Q2:
What does the recommended refresh rate for LCD monitor?
A:
Recommended refresh rate in LCD monitors is 60Hz, In case of any disturbance
on screen, you can set it up to 75Hz to see if that removes the disturbance.
Q3:
What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .
icm)?
A:
These are the driver files for your monitor. Follow the instructions in your user
manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .
icm files) or a driver disk when you first install your monitor. Follow the instructions to
insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .
icm files) will be installed automatically.
file:///D|/cd manual/philips/Q70G900281312A 20090613/Q70G900281312A 20090611/lcd/manual/ENGLISH/241E1/safety/saf_faq.htm（第 1／5 页）7/10/2009 11:20:52 AM