Bryston B100-DA User Manual
Page 9
B100
dUAL CHANNEL POWER AMPLIFIER
POWER AMPLIFIER SECTION:
Power Output:
100 watts per channel into 8Ω
180 watts per channel into 4Ω
Input Impedance:
50K ohms single ended
Sensitivity:
1v = 100 Watts into 8 ohms
Distortion:
tHd+noise: < 0.005% 20Hz to 20kHz at 100 watts
into 8 ohms,
IMD:
< 0.010% 60Hz + 7KHz mixed 4:1
Noise:
>108dB below rated output (with 20Hz to 22KHz
bandpass filter)
Slew Rate:
>60 volts per microsecond
Power Bandwidth:
<1 Hz to over 100 kHz
Damping Factor:
Over 500 at 20 Hz, ref. 8 ohms
Power consumption:
idle 30va, maximum power 600va
Heat load:
idle 100 btu/hr., max power 288 btu/hr
PREAMPLIFIER SECTION:
Frequency response:
20Hz to 20KHz, ±.05dB
IMD or THD:
<.007%
High Level Sensitivity:
500mv
Noise:
100dB @ 20Hz to 20KHz
(ref: 1v input)
GENERAL:
Dimensions:
17” or 19” wide X 4.55” high X 14” deep
(433 or 483mm X 116mm X 353mm)
Weight:
approx. 30 lbs (13.6kg.)
B100 SPECIFICATIONS:
6