Babies "R"Us 1926032H11 - Manual (Page 5)

Bed Rail Assembly and Set Up
Step 1 : Remove bed rail from packaging and set all parts out in front of you.
Step 2 : Start by inserting the one side of the Horizontal Support Tube into the
Left Receiver Assembly and then insert the opposite end of the tube into the
Right Receiver Assembly. It is important to make sure the spring button has a
secure engagement so that they cannot be pulled apart.
(Diagram A1)
Step 3 : Next, install the straps for the Anchor parts. (Diagram B1)
(Diagram A1)
(Diagram B1)
Insert the end of the left mounting strap into the guide hole on the Left Receiver
Assembly.
(Diagram B2)
Be sure that the locking tab is in the open position. (Diagram B3)
(Diagram B2) (Diagram B3)
4