Philips Wake-up Light - Manual (Page 7)

1 Press the alarm button to switch on the alarm.
, The time indication of the alarm time flashes.
, Alarm icon appears on display.
2 Press the + or - buttons to select the time.
Note: You can only do this when the time indication flashes. If this is not the
case, press the alarm button again to enter the alarm time mode.
Tip: Press the + or - button >2 seconds to speed up the digit change.
3 Press the Alarm button to confirm or wait for 5 seconds.
Note: The alarm icon is shown in the display to indicate the alarm is ON.
The alarm time is now set.
switching off the alarm
When the alarm goes off, you can switch off the alarm by pressing on the
alarm button. The alarm will go off again the next day.
When you want to switch off the alarm for the next day, or before the
alarm goes off, press the alarm button again.
Note: The alarm icon disappears from the display.
Note: The lamp stays on to light your room. You can switch off the lamp by
pressing the light on/off button.
Note: The alarm (sound and/or light) automatically switches off after
90 minutes.
EnglisH 7