Philips FMxxFD25B/00 - Manual (Page 5)

2 Your USB flash drive
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your
product at www.philips.com/welcome
3 Install
Microsoft ® Windows Vista, XP, 2000, ME, MAC OS 9.0 or
higher:
• The device driver is installed automatically when the drive is
connected to a USB port of the computer. However, with some
USB 2.0 cards or boards, you may need to initiate installation
manually. In this case, follow the on-screen instructions to search for
a suitable driver. Refer to the operating system's Help file if you
need any help.
Note
Do not remove USB flash drive from the computer USB port as long
as the download process is in progress.
Windows 98SE:
Download the device driver at http://www.philips.com/storage
Push the slider button upwards until it clicks into position and
the USB connector comes out (fig.1).
Insert the flash drive USB connector into one of the computer’s
USB ports (fig. 2).
> The New Hardware wizard starts and the drive’s LED lights up.
The light intensity of the LED will gradually increase and then
diminish again.This will continue for as long as the drive is
connected to the computer.
Click the Next button. 4
3
2
1
2
1
5
E
N
G
LI
SH