Philips SHAVER Series 9000 afeitadora eléctrica en mojado y seco - Manual (Page 17)

Deactivating the travel lock
1 Press the on/off button for 3 seconds.
, The travel lock symbol flashes and then lights up
continuously.
The shaver is now ready for use again.
Note: You can also deactivate the travel lock by
connecting the appliance to the mains.
Replacing shaving heads
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
- The appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads. The replacement reminder lights up
white continuously and the arrows flash white.
You hear a beep to indicate you have to replace
the shaving heads.
Note: After replacing the shaving heads, you need to
reset the shaver by pressing the on/off button for
7 seconds.
Exclamation mark
Blocked shaving heads
- If the shaving heads are blocked, the exclamation
mark lights up orange continuously. The
replacement reminder and the cleaning reminder
flash white alternately and you hear a sound. In
this case, the motor cannot run because the
shaving heads are soiled or damaged.
- When this happens, you have to clean the shaving
heads or replace them.
ENGLISH 17