Behringer 180-Watt Bass Amplifier with Original BUGERA Speaker and VTC-Technology BX1800 - Manual (Page 6)

6 ULTRABASS BX1800 User Manual
2. Wiring Tips
Figures 2.1 and 2.2 show you how to connect your bass to the amplifier.
If you want to use an effects unit (for example, the BEHRINGER X V-AMP PRO)
to experiment with some out-of-the-ordinary sounds, you can connect your bass
directly to the input of the unit. Then, connect a second cable from the effects
output to the input on your bass amp.
If you have an electronic tuner, please be sure to insert it pre effects device,
so that the tuner only receives a dry signal without effects components.
X V-AMP PRO: no additional tuner required.
◊ The built-in loudspeaker is disabled automatically when you plug in
the headphones.
PEDAL CONFIGURE BASS EQ PRESENCE
GAIN
2ND FUNCTION COPY
/ VOLUME
ADJUST
BYPASS/TUNER
1 2 3 4
BEHRINGER
ULTRABASS BX1800
CD Player
Output
BEHRINGER X V-AMP
Headphone
BEHRINGER
HPS3000
E-Bass
Instrument
input
Input
CD player
input
Fig. 2.1: Example of a setup using the ULTRABASS BX1800
Fig. 2.2 shows a recommended setup for amplifying the sound of your BX1800
using a sound reinforcement system of any size. This way, you can also use your
amp for playing live or for rehearsals with your band.
BEHRINGER
BASS V-AMP
BEHRINGER
EUROLIVE B1520 PRO
Outputs
BEHRINGER
EUROPOWER
EP1500
Main
Outputs
BEHRINGER
EURORACK
UB1222FX-PRO
Input
Instrument In
E-Bass
BEHRINGER
ULTRABASS BX1800
XLR D.I.
Out
Fig. 2.2: Live setup