Philips SHAVER Series 3000 afeitadora eléctrica en seco - Manual (Page 5)

compliance with standards
- This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliances are safe to use based
on scientific evidence available today.
general
- The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
- Maximum noise level: Lc = 69dB(A)
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment (Fig. 3).
- The built-in rechargeable battery (specific types only) contains
substances that may pollute the environment. Always remove the
battery before you discard and hand in the appliance at an official
collection point. Dispose of the battery at an official collection point
for batteries. If you have trouble removing the battery, you can also
take the appliance to a Philips service centre. The staff of this centre
will remove the battery for you and will dispose of it in an
environmentally safe way (Fig. 4).
Removing the rechargeable battery (specific types only)
Only remove the rechargeable battery when you discard the shaver.
Make sure the battery is completely empty when you remove it.
Be careful, the battery strips are sharp.
1 Check if there are screws in the back of the shaver. If so, remove
them.
2 Remove the back and/or front panel of the appliance with a
screwdriver. If necessary, also remove additional screws and/or
parts until you see the printed circuit board with the rechargeable
battery.
EnglISh 5