Behringer Dynamic Microphone XM1800S - Manual (Page 2)

2
DYNAMIC MICROPHONE XM1800S
3. AUDIO CONNECTION
1. SAFETY PRECAUTIONS
Detailed safety precautions:
Please read all safety precautions and operating instructions before you attempt to operate the unit.
Keep all safety precautions and operating instructions for future reference.
Damage:
Take care not to drop your microphone as this can lead to severe damage. BEHRINGER assumes
no liability for any damage caused by the user.
Maintenance and care:
When the microphone is not in use, please take it out of its clip, clean it with a soft cloth, and then
place it in its case.
Caution:
Never dismount the screen holding the capsule, as this can damage the microphone! Any such
attempt will void the warranty.
2. INTRODUCTION
Thank you for expressing your confidence in us by purchasing the BEHRINGER XM1800S dynamic
microphone. The XM1800S combines highest quality standards at an affordable price and best
results in audio perfomances for both vocal and instrument miking applications. The features of the
XM1800S will make it a valuable tool for your recording and live performan
3. AUDIO CONNECTION
Use a standard microphone cable to connect your XM1800S to any mixer, power mixer, amp, or mic
preamp. Connect the female XLR end to the XM1800S’ male XLR input connector and the other end
of the cable, normally a male XLR connector, to the mixer, power mixer, amp, or mic preamp.
Fig. 3.1: Balanced XLR conector