Philips SENSEO® Sistema de monodosis de café - Manual (Page 10)

2 Press the on/off button I.
The indicator light blinks while the water is heating up. Heating up takes
approx. 90 seconds.
, The coffee machine is ready for use when the indicator light burns
continuously.
3 Move the lever upwards to release the lid.
4 Open the lid.
5 Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in the centre is not
clogged, e.g. with loose coffee grounds.
Tip: To keep your coffee hot longer, preheat the SENSEO
® machine and cup
with hot water by putting the cup under the spout and press the 1-cup button.
Please make sure there is no pod in the pod holder while preheating your cup.
Keep the hot water in your cup for 30 seconds before emptying it and then
brew coffee.
, If you want to make one cup of SENSEO ® coffee, use 1 coffee pod in
combination with the 1-cup pod holder ° and the 1-cup button °.
, If you want to make two cups or a mug of SENSEO ® coffee, use
2 coffee pods in combination with the deeper 2-cup pod holder
°°
and the 2-cup button °°.
6 Place the SENSEO ® coffee pod(s) properly in the centre of the pod
holder, with the SENSEO ® branded side pointing upwards.
Note: Use SENSEO ® coffee pods from Marcilla specially designed for your
SENSEO ® coffee machine for a full and round taste.
, Place 1 SENSEO ® coffee pod in the 1-cup pod holder °.
EnglisH
10