Bunn 12 CUP AUTOMATIC COFFEE BREWER RL35 - Manual (Page 2)

BUNN ® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.
Dimensions & Specifications
BUNN Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
Model Product # Volts Amps Tank Heater Total Brewing Cu. Shipping Cord
Watts Watts Capacity Ft. Weight Attached
RL35 20825.0000 120/240 19.2 3500 4050 7.5 gal./hr. 9.3 44 lbs. No
Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
Electrical: Model requires 3-wires plus ground service rated 120/240V (115/230, 120/208), single phase, 60 hz.
Plumbing: 10-90 psi (138-621 kPa). Supplied with 1 ⁄
4
" OD male flare fitting.
8.0
5.0
2.4 14.00
2.03
18.5
Ø.875 HOLE
FOR POWER
SUPPLY
CONNECTION
23.5
1.55
24.00
20.84
Ø.875 HOLE FOR
POWER SUPPLY
CONNECTION
11.2
1.0
(1.25 MAX FOR
LEVELING MACHINE)