Bissell 2810 - Manual (Page 7)

7
Troubleshooting
No Power
Possible Causes Remedies
Perfect Sweep TURBO is not charged Make sure Perfect Sweep TURBO has been properly plugged
thoroughly. into an outlet for the recommended amount of time. See
"Charging the Battery" on page 5.
Dirt Cup is not secure in the unit. Press down on the unit for a snug fit.
If suggested solutions for this or any function of the Perfect Sweep TURBO
do not correct the problem, call BISSELL Consumer Services.
Replacement parts are available through BISSELL Consumer Services,
an authorized BISSELL Service Centre or by visiting our website. To locate
an authorized Service Centre or to place an order using Visa or MasterCard call:
BISSELL Consumer Services
1-800-263-2535
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or visit our website @
www.bissell.com
Item Part No. Part Name
1 203-1257 DC Adapter
2 203-1253 Metal Extension Handle with Handle Grip
3 203-1254 Handle Clip
4 203-1255 Dirt Cup
1 1
2 2
Replacement Parts
1
2
3 4
WARNING:
This product contains a nickel-cadmium (Ni-Cd) rechargeable
battery pack. According to Federal and State regulations, removal and proper
disposal of Ni-Cd batteries is required. For removal of the battery pack in your
Perfect Sweep TURBO, see instructions below:
1. IMPORTANT: Unplug charger.
2. Remove handle and dirt cup.
3. Remove (10) Phillips head screws on the bottom cover as shown in picture.
4. Separate top and bottom cover.
5. Remove wire connectors from the battery pack.
6. Keep Battery Pack together - DO NOT separate individual batteries.
For specific disposal instructions of batteries, please contact:
RBRC (Rechargeable Battery Recycling Corporation) 1-800-822-8837 or
visit the website: www.rbrc.com.
7. Discard remainder of product.
Caution: Disconnecting the battery will destroy the appliance and invalidate the warranty.
See the following instructions to dispose of the batteries after they have exceeded the battery life.
10 Screws