BT Synergy 700 - Manual (Page 6)

Duet 700 ~ 7th Edition ~ 31st October ’01 ~ 3845
6
When on a call you can
talk to someone in the
same room, without
your caller hearing.
During a call press
the SECRECY button.
The LED will flash to
indicate that secrecy
is on. You can talk and
your caller will not
hear you.
To resume your call
press the SECRECY
button again. The LED
will stop flashing.
1 Connect
ZZZ To switch secrecy on
and off
Secrecy
Secrecy
1 Connect
ZZZ To adjust the speaker
volume
Set
Press the SET button.
The display will show
the current volume
level: HANDSET VOL 3
There are 5 levels.
1= quietest. 5= loudest.
Press the UP/DOWN
button to increase or
decrease the volume.
The display will show
the volume increase
or decrease. Hold the
handset to your ear to
see which volume level
suits you.
Press the SET button
to confirm the level
chosen.
The display will show
RINGER VOL
.
If you do not wish to
change the ringer
volume setting, replace
the handset.
to indicate you have unviewed
new calls in your calls list.
See page 12
.
NOTE
The speaker volume will reset
to volume level 3 when you
replace the handset.
NOTE
The following settings can only
be adjusted when the telephone
is off the base.
Set