Co614b, The parts of this co alarm – BRK electronic CO614B User Manual

Page 2

brkelectronics.com

A R C H I T E C T U R A L A N D E N G I N E E R I N G S P E C

I N S T A L L A T I O N O F A L A R M

The carbon monoxide alarm shall be a BRK Model CO614 and shall provide at a
minimum the following features and functions:
1. An electrochemical CO sensor and an LCD multifunction digital display with peak

CO level memory capability.

2. Powered by 120V AC, 60Hz and have a monitored 9V battery backup and a solid

state piezo horn rated at 85dB at 10 ft. and shall be capable of self restoring.

3. The unit shall perform self diagnostic tests and issue a malfunction warning both

audibly (three chirps) and visually (“Err” in display) if the unit malfunctions.

4. A visual LED power-on indicator to confirm unit is receiving power or to confirm

unit has switched to battery backup mode. In battery backup mode, digital

display indicates “bAt”; “bAt” indication will flash if battery is weak or missing.

5. The CO sensor is adjusted not to detect CO levels below 30 PPM and will not

alarm when exposed to constant levels of 30 PPM for 30 days. It will alarm

at the following levels: 400 PPM CO between 4 and 15 minutes, 150 PPM CO

between 10 and 50 minutes and 70 PPM CO between 60 and 240 minutes.

6. A test/silence button to check all alarm functions and to silence any nuisance

alarms. In addition, the unit shall have a low battery silence feature to quiet the

low battery chirp for up to eight hours.

7. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and

relative humidity between 10% and 95%.

8. The unit shall at a minimum meet the requirements of UL2034, NFPA 720 and ICC.

S H I P P I N G S P E C S :

T E C H N I C A L S P E C S

Individual Carton Dimensions

6.81"L x 3.99"W x 2.38"H

Weight

0.61 lbs.

Cube

0.037 ft3

UPC

0 29054 00382 9

Master Carton Dimensions

7.69"L x 7.31"W x 7.38"H

Master Pack

Weight

4.0 lbs.

Cube:

0.24 ft3

I2 of 5:

600 29054 00382 1

Pallet Information

Cases per Layer

Number of Layers:

Cases per Pallet:

180

Units per pallet:

1,080

Cube:

49.3 ft3

Weight:

785 lbs.

Alarm Dimensions:

5.9” H x 3.6” L x 1.5" D

Weight:

6.5 oz

Operating Voltage:

120V AC 60Hz w/ 9V battery backup

Operating Current:

.09 amps (standby/alarm)

Temperature Range:

40°F (4°C) to 100°F (38°C)

Humidity Range:

10% to 95% relative humidity (RH)

Audio Alarm:

85dB at 10 feet

Test/Silence:

Electronically simulates carbon

monoxide condition, causing the unit to alarm

Press and hold test/silence button

Alarm Reset:

Automatic when CO clears

Interconnections:

Up to 18 units of First Alert or BRK Smoke, CO and

Heat Alarms. Maximum of 12 smoke alarms. See

user’s manual for details.

CO Sensor:

Electrochemical

Indicator Lights/Sounds:
AC Power:

Constant Red LED, Display: blank

DC Power:

Intermittent Red LED, Display: "bAt"

Local Alarm:

Red LED flashes rapidly, Display: CO level in PPM

Listing:

Listed to UL2034 Standard

First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM2930

TOP/END VIEW

SIDE VIEW

CAT.

CO614B

THE PARTS OF THIS CO ALARM

1. Test/Silence/Scroll Button

2. POWER/ALARM Light

3. Digital Display

4. Air Vents

5. Alarm Horn (under cover)

MOUNTING

BRACKET

Installation of this smoke alarm must conform to all local electrical codes and Article 760
of the National Electrical Code (NFPA 70) and NFPA 720.

5.9"

3.6"

1.5"

2.2"