Bosch MUM 7400 UC - Manual (Page 9)

9
8. Continue use.
If the attachment was of the batch-feed
type and you wish to continue using
the attachment, empty the bowl or jar
of the attachment per its specific
instructions and reinstall the
attachment as before. Restart the
power unit by turning the rotary switch
to the desired speed. If the timer
function was being used when the
power unit was stopped, turning the
rotary switch back on to the desired
speed will cause the power unit to
continue to operate for the remaining
time or until again interrupted. Repeat
as necessary to complete necessary
work.
9. Work completed,
remove attachment.
If the attachment is of the continuous
feed type or is the batch type and you
have completed the work you wished
to perform, turn the rotary switch to
the Off position, “O/Off ” and unplug; if
the timer function was being used,
depress the “time off” button (this will
turn off timer function and the digital
timer display) and then turn rotary
switch to the Off position, “O/Off,” and
unplug. With the power unit off and
unplugged, remove the attachment
from the power unit per the instructions
for the specific attachment being used.
10. Place contents (batch feed type).
If the attachment is the batch feed
type, disassemble per the specific
attachment’s instructions and place
the contents in a suitable container.
11. Care and cleaning.
Once you have completed working
with the Bosch Kitchen Machine, the
next step is to disassemble and clean
the attachments. If you wish to use
another attachment, please return to
step 4, above.
Power unit
With the power unit turned Off and
unplugged, it should be cleaned only with
a clean, damp cloth. Then wipe off the motor
drive cover and reinstall on the power unit.
Never use coarse or caustic cleaning
products to clean the power unit. Never
immerse the power unit in water.
The power unit may be left on the counter
or stored for future use. In either case,
always be sure to replace the motor drive
cover on the mono drive. This will prevent
dust and/or flour buildup in the drive.
The Bosch Concept 7400 Kitchen Machine
has been specially designed to enable it to
be stored in a drawer. Wind the cord around
the cord holder and, using the carry grips,
lift the power unit and place in your chosen
storage area.
Attachments
The attachment(s) that has been used
should be disassembled and washed, per
their specific instructions, dried and stored
for future use.
STANDARD ATTACHMENTS
Following are the specific instructions for
the standard attachments provided with the
Bosch Concept 7400 Kitchen Machine.
Stainless Steel Mixing Bowl (MUZ 7
ER1) with Twin Beating Whisks and
Dough Hook
WARNING
1. There is a risk of injury from rotating
tools when using the mixing bowl with
the dough hook or the twin beating
whisks.
2. Avoid contact with moving parts. Keep
hands, hair and clothing, as well as
spatulas, bowl scrapers and other
utensils away from dough hook and