Bissell 4104SERIES - Manual (Page 5)

5
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
the only tool you’ll need to assemble your
vacuum cleaner is a phillips screwdriver.
Attach handle to vacuum
1. Locate the handle and cord wrap. Remove
the screw packet taped to the handle.
2. Stand the vacuum upright and from the
rear of the unit, slide the base of the handle
firmly into the grooves at the top of the
vacuum body.
3. Ensure that the handle fits firmly to the
vacuum body. If there are any gaps, continue
to push firmly until the handle is secure.
4. Insert the provided screw into the existing
hole, attaching the handle to the body of the
vacuum. Tighten securely with a screwdriver.
A
ssembly
caUtIon:
Do not plug in your
vacuum cleaner until
you are familiar with
all instructions and
operating procedures.
Hose
Wand
2.
4.
Quick Release ™
Cord Wraps
Quick
Release ™
Cord Wraps