beautypg.com

Installation, Specifications, Installation 7. specifications – Behringer Eurolive B215XL/B215XL-WH User Manual

Page 8

background image

8

EUROLIVE B215XL/B215XL-WH/B212XL/B212XL-WH User Manual

6. Installation

The EUROLIVE B212XL/B215XL features professional speaker connectors that

assure problem-free operation. The connector was developed for loudspeakers

with high power ratings. If it is connected into the corresponding plug, it locks

into place and cannot accidentally be disconnected. It protects against electric

shock and assures correct polarity. Each of the plugs only carries the assigned

individual signal.

1-

2-

2+

1+

1-

2-

2+

1+

front view

rear view

Professional speaker connector

(compatible with Neutrik Speakon connectors)

Fig. 6.1: Professional speaker connector

Please use only commercially available cables to connect your loudspeakers

to the power amp. Verify the pin assignment of your loudspeakers and cables

depending on the loudspeaker output you are using.

strain relief clamp

sleeve

tip

sleeve

(ground/shield)

Unbalanced ¼" TS connector

tip

(signal)

Fig. 6.2: ¼" TS connector

7. Specifications

System Data

High-Performance Woofer

B215XL:

15" (381 mm)

B212XL:

12" (305 mm)

Tweeter Compression Driver

B215XL and B212XL:

1.75" (44 mm)

Frequency Range

B215XL:

55 Hz to 20 kHz

B212XL:

65 Hz to 18 kHz

Power Rating

B215XL:

1000 W Peak Power 250 W Continuous

Power (IEC 60268-5)

B212XL:

800 W Peak Power 200 W Continuous

Power

(IEC 60268-5)

Impedance

B215XL and B212XL:

8 Ω

Sensitivity (1 W @ 1 m)

B215XL:

96 dB (Full Space)

B212XL:

95 dB (Full Space)

Dispersion

B215XL:

70° x 40°

B212XL:

90° x 60°

Crossover frequency

B215XL:

2.0 kHz

B212XL:

1.9 kHz

Dimensions/Weight

Dimensions (H x W x D)
B215XL:

approx. 27 1⁄3 x 17 1⁄3 x 13 1/��"

approx. 695 x 440 x 335 mm

B212XL:

approx. 21 2/� x 13 5/� x 10 5/�"

approx. 550 x 345 x 270 mm

Weight

B215XL:

38.7 lbs / 17.6 kg

B212XL:

24.0 lbs / 10.9 kg

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.