Belkin ScreenCast AV4 - Manual (Page 6)

4
GeTTInG sTaRTeD
Receiver:
A. Video source select button
• Allows you to cycle between AV source products that
you have connected
B. Pairing button for syncing with other ScreenCast transmitters
• Allows you to add additional ScreenCast transmitters
C. HDMI output to HDTV
D. USB port
• This is for future product upgrades.
E. Reset button
• If you press this button for less than 5 seconds,
the ScreenCast receiver will restart.
• If you press this button for more than 5 seconds, the ScreenCast
receiver will be restored to factory defaults. It will need to
be paired again with whatever transmitters you are using.
F. Power input
G. Power (on/off) switch
(B) (A) (D)(E)(F)(G) (C)
screenCast aV 4 Receiver