Individual settings ʑ, Important information – Neff W5440X1GB User Manual

Page 5

ьььь cь ¯

Important information

Before using your washing machine for the first time

Do not put any washing in the washing machine! Turn the tap on. Pour into dispenser

II:

– approx. 1 litre water.
– Detergent (dosage according to manufacturer’s instructions for light soiling and according to degree of water

hardness).

– Set programme selector to

Easy-Care 60 °C and select Start/Pause.

At the end of the programme set the programme selector to

Off.

Protecting the washing and the machine

– When dosing all detergents, cleaning aids and cleaning agents, always follow the manufacturer's instructions.
– Empty pockets.
– Remove metal parts (paper clips, etc.).
– Wash delicates in the net/bag (tights, curtains, underwired bras).
– Close zips, button up covers.
– Brush sand out of pockets and collars.
– Remove curtain fittings or include in the net/bag.

Insert laundry

Insert large and small items of washing!
Do not jam items of washing between the washing machine door and rubber seal.

Washing with different degrees of soiling

Wash new items separately.

Light

Do not Prewash.

If required, pretreat stains. Select

Eco

additional function.

Heavy

Load less washing. Select programme with Prewash.
If required, pretreat stains. Select

Eco

additional function.

Soaking

Load washing of the same colour.

Pour soaking agent/detergent into dispenser

II according to the manufacturer’s instructions. Set programme selector to

Cottons 30 °C and select Start/Pause. After approx. 10 minutes select Start/Pause to stop the programme. After the
required soaking time reselect

Start/Pause if the programme is to be continued or change the programme.

Starching

Washing should not be treated with fabric softener.

Liquid starch can be used in all wash programmes. Pour starch into the fabric softener dispenser ~ according
to manufacturer’s specifications (if required clean beforehand).

Dyeing/Bleaching

Dye in household quantities only. Salt may attack stainless steel! Observe specifications of the dye manufacturer!
Do not bleach washing in the washing machine!

Emergency release

e.g. if power failure occurs.

The programme continues running when the power supply is restored. If the washing is still to be removed, the door
can be opened as described below:

Risk of scalding!
Detergent solution and washing may be hot. If required, leave to cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.

Set programme selector to

Off., pull out the mains plug.

Removing base strip a see separate installation instructions.

Drain the water. aPage 10

Pull down emergency release with a tool and release.
Door can then be opened.

Attaching base strip a see separate installation instructions.

ʔ
ʔ
ʔ

ʋ
ʔ

ʔ
ʔ

Individual settings

Option buttons

You can change the spin speed and temperature beforehand and while the selected programme is running.
Effects dependent on the programme progress.

Temp.

You can change the indicated washing temperature. The maximum washing temperature which can be selected
depends on the set programme.

r/pm (Spin speed, revolutions per minute)/

(Rinse stop = without final spin)

You can change the indicated spin speed or select (Rinse stop = without final spin cycle, washing remains in the
water after the last rinse cycle).
The selectable maximum spin speed depends on the model and the selected programme.

Ready in

The respective programme duration is displayed by selecting the programme. The programme start can be delayed
before the programme begins. The

Ready in time can be set in hour steps up to maximum 24h.

Keep pressing the

Ready in button until the required number of hours is indicated (h=hour). Select

Start/Pause. Settings cannot be made when the programme has started.

Additional functions

Overview of programmes, Page 7

Eco

Energy-optimised washing by reducing the temperature while achieving a consistent
washing result.
The washing temperature is lower than the selected temperature. For special hygiene
requirements, the

Sensitive programme is recommended.

Prewash

For heavily soiled washing. Prewash at 30 °C.

Less Ironing

Special spin sequence with subsequent fluffing. Gentle final spin at reduced spin speed.
Residual moisture of the washing slightly increased.

Extra Rinse

Additional rinse cycle. Longer programme duration.
For areas with very soft water or for further improvement of the rinsing result.

Start/Pause

For starting or interrupting the programme.

Signal

Set volume for ...

set to

1 step to right

select

and

hold

1 step to right

set to

direct

... Button signals

... Information signals

set volume *

1 step to right

set volume *

* If required,
select repeatedly

Activate setting mode
for signal volume

release