To change the setting, Open the door, Switch on on/off switch – Neff S51T69X3GB User Manual
Page 20: Release both buttons, Press start button ), Close the door, Remaining running time display, Timer programming, Additional options, Programme selection
en Additional options
20
Programme selection
You can select a suitable programme
according to the type of utensils and
degree of soiling.
Information for test institutes
Test institutes receive the information for
comparability tests (e.g. according to
EN60436).
These are the conditions for conducting
the tests, however these are not the
results or consumption values.
Request by e-mail to:
[email protected]
The product number (E no.) and the
production number (FD) are required
which you can find on the rating plate
92 on the appliance door.
0
Additional options
A
d
d
i
t
i
o
n
a
l
o
p
t
i
o
n
s
* depending on model
Additional options can be set with
the buttons h.
Å
Express WashPlus/
Speed PerfectPlus
(VarioSpeedPlus) *
Express WaschPlus/SpeedPerfectPlus (VarioSpeedPlus)
This function can reduce the running
time by approx. 20% to 66%
depending on the selected rinse
programme. To obtain optimum
cleaning and drying results at a reduced
running time, water and energy
consumption are increased.
Half load
§
Half load *
If you have only a few items to wash
(e.g. glasses, cups, plates), you can
switch to “half load”. This will save
water, energy and time. It is
recommended to put a little less
detergent in the detergent dispenser
than for a full load.
μ
HygienePlus *
HygienePlus
This function increases the temperatures
and retains them for an extra long time
to obtain a defined disinfection
performance. Continuous use of this
function increases the hygiene status.
This additional option is ideal for
cleaning e.g. chopping boards and baby
bottles.
Ï
Intensive zone *
Intensive zone
Perfect for a mixed load. You can wash
very soiled pots and pans in the lower
basket together with normally soiled
utensils in the upper basket. The spray
pressure in the lower basket is
intensified, the rinsing temperature is
increased slightly.
¿
Extra drying *
Extra drying
An increased temperature during the
final rinse and an extended drying
phase ensure that even plastic parts dry
better. There is a slight increase in the
energy consumption.