Spray arms, Unscrew the upper spray arms 1: (1/4 revolution), Remove the lower spray arm 1j upwards – Neff S58T69X0GB User Manual
Page 25: Clean spray arms under running water, Re-engage or screw on spray arms, 3 fault, what to do, Fault, what to do, Note, M warning, Cleaning and maintenance
Cleaning and maintenance en
25
Changing the programme
When the START button ` has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme
(Reset).
Intensive drying
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button ` until
•:‹.... is indicated on the digital
display.
4. Release both buttons.
The LED for button # flashes and
the digital display h displays the
factory setting
•:‹….
5. Press programme button # until
the factory set value
š:‹‹ is
indicated on the digital display h.
To change the setting,
1. Press the button 3 to switch the
Intensive drying on
š:‹‚ or off š:‹‹.
2. Press START button `.
The set value is saved.
3. Close the door.
2
Cleaning and
maintenance
C
l
e
a
n
i
n
g
a
n
d
m
a
i
n
t
e
n
a
n
c
e
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall condition
of the machine
Check spray arm for grease
and limescale deposits.
If you find such deposits:
Fill detergent dispenser with
detergent. Start the appliance without
utensils in the programme with
the highest rinsing temperature.
Clean the appliance with detergents/
appliance cleaners which
are particularly suitable for use with
dishwashers.
To ensure that the door seal always
remains clean and hygienic, regularly
clean it with a damp cloth and a little
washing-up liquid.
If the appliance is switched off for
a prolonged period, leave the door
ajar to prevent the formation of
an unpleasant odour.