beautypg.com

3 fault, what to do, Fault, what to do, Note – Neff S65M63N1GB User Manual

Page 19: M warning, Waste water pump, In this case, Remove the filters 1, Scoop out water, use a sponge if required, Install filters, Cleaning and maintenance

background image

Cleaning and maintenance en

19

Changing the programme

When the START button ` has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme
(Reset).

Intensive drying

The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Close the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #

and press START button ` until
the digital display )"

•:‹... is

indicated.

4. Release both buttons.

The LED for button # flashes and
the digital display )" displays the
factory setting

•:‹….

5. Press programme button # until

the factory set value

š:‹‹ is

indicated on the digital display )".

To change the setting,
1. Press the button 3 to switch the

Intensive drying on

š:‹‚ or off š:‹‹.

2. Press START button `.

The set value is saved.

2

Cleaning and

maintenance

Cleaning and maintenance

A regular inspection and maintenance

of your machine will help to prevent
faults. This saves time and prevents
problems.

Overall condition
of the machine

Check spray arm for grease
and limescale deposits.

If you find such deposits:

Fill detergent dispenser with
detergent. Start the appliance without
utensils in the programme with
the highest rinsing temperature.

Clean the appliance with detergents/
appliance cleaners which
are particularly suitable for use with
dishwashers.

To ensure that the door seal always
remains clean and hygienic, regularly
clean it with a damp cloth and a little
washing-up liquid.
If the appliance is switched off for
a prolonged period, leave the door
ajar to prevent the formation of
an unpleasant odour.

Never use a steam cleaner to clean your
dishwasher. The manufacturer is not
liable for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water
and a little washing up liquid
are adequate. Do not use sponges with
a rough surface or abrasive detergents,
as these could scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths
or wash them out thoroughly several
times before using for the first time.