Neff S41E50W0GB - Manual (Page 9)

Getting to know your appliance en
9
*
Getting to know your
appliance
G e t t i n g t o k n o w y o u r a p p l i a n c e
Diagrams of the control panel
and the interior of the appliance can be
found in the envelope at the front.
Individual positions are referred
to in the text.
Control panel
* depending on model
** Number depending on model
Appliance interior
* depending on model
+
Water softening
system/Special salt
W a t e r s o f t e n i n g s y s t e m / S p e c i a l s a l t
To ensure good washing results,
the dishwasher requires soft water, i.e.
containing low amounts of lime,
otherwise white limescale will be
deposited on the utensils and inner
container.
Tap water above 1.2 mmol/l must be
softened. The water is softened with
special salt (regeneration
salt) in the water softening
system of the dishwasher.
The setting and therefore the required
amount of salt
depends on the degree of hardness of
your tap water (see table).
Setting
The amount of salt dispensed can be
set from
•:‹‹ to •:‹ˆ.
Salt is not required at the set
value
•:‹‹.
1. Find out about the hardness value of
your tap water. Your water utility
company will help you with this.
2. Set value can be found in the water
hardness table.
3. Close the door.
4. Switch on ON/OFF switch (.
5. Press and hold down the START
button @.
6. Rotate programme selector 8
until •:‹... is indicated on the digital
display H.
7. Release button.
The factory set value •:‹… is lit on
the digital display H.
( ON/OFF switch
0 Door opener
8 Programme selector
@ START button
H Digital display
P Timer programming *
X Additional options **
` Rinse aid refill indicator
h Salt refill indicator
)" Display “Check water supply”
1" Top basket
1* Knife shelf *
12 Tablet collecting tray
1: Top spray arm
1B Bottom spray arm
1J Dispenser for special salt
1R Filters
1Z Cutlery basket
1b Bottom basket
1j Dispenser for rinse aid
9" Detergent dispenser
9* Lock for detergent dispenser
92 Rating plate