BBE DI-100X - Manual (Page 5)

LOW CONTOUR CONTROL
Regulates the amount of phase
corrected bass frequencies.
PROCESS CONTROL
Regulates the amount of
phase correction.
IN/OUT TOGGLE SWITCH
Engages the Sonic Maximizer
Process. When the switch is pushed
up, the BBE Process is on. When
the switch is down, the BBE Process
is off.
15dB PAD SWITCH
This toggle switch selects the desired
gain range of the DI-100x.
When the switch is down, the DI-
100x is in normal mode. When the
Pad switch is up, the DI-100x input is
attenuated by 15dB.
1/4” INPUT CONNECTOR
The 1/4” input connector of the
DI-100x is unbalanced. The 1/4”
input is designed for running
instrument cables directly into
the DI-100x.
1/4” THRU CONNECTOR
This 1/4 “ connector is wired in
parallel to the Input connector
and is used for continuing the
connection to the instrument
amplifier.
FRONT PANEL
5