Belkin F1DA104T - Manual (Page 15)

13
I N STA L L AT I O N
BANK DIP Switch Configuration Chart
DIP SWITCH# BANK ADDRESS
1 2 3 4 5 6
ON ON ON ON ON ON BANK 00 MASTER (default)
ON ON OFF ON ON ON BANK 01 SLAVE
ON ON ON OFF ON ON BANK 02 SLAVE
ON ON OFF OFF ON ON BANK 03 SLAVE
ON ON ON ON OFF ON BANK 04 SLAVE
ON ON OFF ON OFF ON BANK 05 SLAVE
ON ON ON OFF OFF ON BANK 06 SLAVE
ON ON OFF OFF OFF ON BANK 07 SLAVE
ON ON ON ON ON OFF BANK 08 SLAVE
ON ON OFF ON ON OFF BANK 09 SLAVE
ON ON ON OFF ON OFF BANK 10 SLAVE
ON ON OFF OFF ON OFF BANK 11 SLAVE
ON ON ON ON OFF OFF BANK 12 SLAVE
ON ON OFF ON OFF OFF BANK 13 SLAVE
ON ON ON OFF OFF OFF BANK 14 SLAVE
ON ON OFF OFF OFF OFF BANK 15 SLAVE
Note: “On” is the down position.
Example:
Four 8-Port PRO2s (F1DA108T) are daisy-chained together for controlling
up to 32 computers. The DIP switch on the Master unit is set to “BANK 00”
(factory default) and the Slave units are each set to a unique BANK
(between 01 and 15).