Bunn Deluxe Coffee Grinder - Manual (Page 6)

Setting Grind Adjustment
Before beginning to grind coffee for
the first time, take just a few
moments to become acquainted
with your new coffee grinder. This
may be a good time to read the
" C O F F E E F U N D A M E N T A L S "
section on Page 12 of this booklet.
Be sure the coffee grinder is
unplugged for the following
procedures:
Step 1. Wipe the unit clean -
Before using the BUNN
® Home
Coffee Grinder for the first time,
wipe any lint off all exposed surfaces
of the unit. Remove the hopper lid
and wipe all accessible surfaces with
a damp cloth. Remove the coffee
collector and wipe clean of lint.
When finished, reassemble the unit
and be sure the hopper is empty.
Step 2. Determine the proper
grind setting - The grinder has
been adjusted for “drip grind” at
the factory. To change, remove the
hopper lid and note the setting of
the arrow on the top of the
Grind
Adjust Knob inside the hopper.
Note the raised dots at the base of
the knob. Turning the indicating
arrow counter-clockwise toward the
larger dots results in a coarser grind
and turning the knob clockwise
toward the smaller dots results in a
finer grind (Refer to the illustration
below). The knob can always be
returned to any previous grind
position later for repeatable quality
grind results. For safety reasons, the
grind setting should only be changed
when the hopper is empty with
power off.
PREPARATION FOR GRINDING
Location Of Grind Adjustment
6