Bunn Titan - Manual (Page 2)

BUNN ® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Dimensions & Specifications
Bunn-O-Matic ® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
Model Product # Volts Amps Total Brewing Cu. Shipping Funnel Cord
Watts Capacity Ft. Weight Locks Attached
Titan Dual 39200.0000 120/208 33.4 12000 34.3 gal/hr 27 148 lbs. Yes No
(3-phase)
*120/208 40.1 8200 22.9 gal/hr 27 148 lbs. Yes No
(single-phase)
Titan Dual 39200.0001 120/240 28.9 12000 34.3 gal/hr 27 148 lbs. Yes No
(3-phase)
*120/240 35 8200 22.9 gal/hr 27 148 lbs. Yes No
(single-phase)
Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise).
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
*Brewer can easily be rewired in the field for single-phase operation.
Electrical: Brewer is 4-wires plus ground service rated 120/208V or 120/240V, 3-phase, 60Hz.
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with 3 ⁄
8
" male flare fitting. Requires 4 gpm minimum water flow.
10/08 © Bunn-O-Matic Corporation