Sharp MX-B201D - Manual (Page 21)

MAKING COPIES
20
Setting the number of copies
Press the numeric keys to set the number of copies.
The set number of copies appears in the display. A maximum of 99 copies can be set.
If you wish to make only a single copy, copying is possible with the display
showing "0".
SELECTING THE TRAY
Press the [TRAY SELECT] key ( ).
Each time, you press the [TRAY SELECT] key ( ),
the location indicated by the tray location indicator
changes in the following order : paper tray
→lower
paper tray (when the 250-sheet paper feed unit is
installed.)
→bypass tray.
If you enter the wrong number, press the [CLEAR] key ( ) and
enter the correct number.
The tray location indicator will blink when there is no paper in the paper
tray, or when the tray is not closed or is improperly closed.
OPY.
A5 55
READY TO COPY.
100% EXTRA