Sharp MX-M623U - Manual (Page 26)

24
LOADING PAPER IN A TRAY
Changing the tray settings
When you change the paper in a tray, the tray settings in the system settings must also be changed.
1
Press the [SYSTEM SETTINGS] key.
2
Configure the tray settings in the touch
panel.
(1) Touch the [Paper Tray Settings] key.
(2) Touch the [Tray Settings] key.
(3) Touch the [Change] key in "Tray 3".
(4) Select [Recycled] from the "Type" select
box.
(5) Make sure that [Auto-AB] is selected in the
"Size" select box.
For more information, see "Paper Tray Settings" in
"7. SYSTEM SETTINGS" in the Operation Guide.
(6) Touch the [OK] key.
The above steps change the paper settings for tray 3 to A4
recycled paper.
SYSTEM
SETTINGS
System Settings
Paper Tray Settings Back
Tray Settings
Paper Type Registration
Auto Tray Switching
Custom Size Registration (Bypass)
OK Cancel
System Settings
Tray Settings
Tray:
Type:
Size:
Paper Property:
Tray 3
Recycled
Auto-AB
Admin Password Exit
Total Count
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
Address Control Fax Data
Receive/Forward
USB-Device Check
Default Settings List Print
(User)
System Settings
Back
Change
Fixed Paper Side Disable Duplex Disable Staple Disable Punch
Type
Paper Property
Feeding Approved Job
Plain
A4
Tray Settings
Size
Tray 3
Copy Print Fax I-Fax Doc. Filing
Print
Copy
I-Fax
Fax
A3,A4,A4R,B4,B5,B5R,
216x330(8 1/2x13)
(1)
(2)
(3)
(6)
(4)
(5)