beautypg.com

Before operation setting the clock, Kitchen timer function – Sharp R-722STWE User Manual

Page 234

background image

GB-15

BEFORE

OPERATION

SETTING

THE

CLOCK

Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0W in stand by mode.
To set the clock, see below.

Your oven has a 24 hour clock feature.
1. Press the KITCHEN TIMER/CLOCK button twice. The hour fi gure will fl ash and the clock

indicator will illuminate.

2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be with-

in 0-23.

3. Press the KITCHEN TIMER/CLOCK button, the minute fi gure will fl ash.
4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input

time should be within 0-59.

5. Press the KITCHEN TIMER/CLOCK button to start the clock. The icon “:” of the digital

time will fl ash on the display and the clock indicator will disappear.

NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of

day. If the clock has not been set, the display will show "0:00".

• To check the time of day during a cooking process, press KITCHEN TIMER/CLOCK but-

ton and the LED will display the time of day for 2-3 seconds. This does not affect the
cooking process.

• In the process of clock setting, if the STOP/CLEAR button is pressed, the oven will go back

to the former setting.

• If the electrical power supply to your microwave oven is interrupted, the display will inter-

mittently show "0:00" after the power is reinstated. If this occurs during cooking, the pro-
gramme will be erased. The time of day will also be erased.

KITCHEN

TIMER

FUNCTION

You can use the kitchen timer function, in instances where microwave cooking is not in-
volved for example to time boiled eggs cooked on conventional hob or to monitor the
standing time for cooked/defrosted food.
Example:
To set the timer for 5 minutes.

1. Press KITCHEN

TIMER/CLOCK
button once.

2. Rotate ENTRY

dial to select
time .

3. Press the

START/+30sec/
ENTER
key to
start the timer.

4. Check the display.
(The

display

will count down
through the
programmed time.)

When the timer arrives at 0:00, an audible signal will sound 5 times and the LED will then
display the time of day.
You can enter any time up to 95 minutes. To cancel the KITCHEN TIMER whilst counting
down, simply press the STOP/CLEAR button.
NOTE: The KITCHEN TIMER function cannot be used whilst cooking.

This manual is related to the following products: