Braun 5370 User Manual

Page 7

2 Rub your skin to lift short hairs.

For optimum performance hold the
appliance at a right angle (90°) against
your skin. Guide it in a slow, continuous
movement without pressure against the
hair growth, in the direction of the
switch.
As hair can grow in different directions,
it may also be helpful to guide the
appliance in different directions to
achieve optimum results.
Both rollers of the massaging rollers
clip

should always be kept in contact

with the skin, allowing the pulsating
movements to stimulate and relax the
skin for a gentler epilation.
If you are used to epilation and look
for a faster way to efficiently remove
hair, attach the EfficiencyPro clip

It allows maximum skin contact and
ensures an optimum usage position.

3 Leg epilation (epilation head

with

or ):

Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.

4 Underarm and bikini line epilation

(underarm epilation head

without

attachment):
For this specific application, the narrow
underarm epilation head has been
developed. Thanks to its specific
design adapted to the contours of
these areas, it provides a gentle and
thorough epilation.
Please be aware that especially at the
beginning these areas are particularly
sensitive to pain. With repeated usage
the pain sensation will diminish. For
more comfort, ensure that the hair is
at the optimum length of 2–5 mm.
Before epilating, thoroughly clean the

respective area to remove residue (like
deodorant). Then carefully dab dry with
a towel. When epilating the underarm,
keep your arm raised up so that the skin
is stretched and guide the appliance in
different directions.
As skin may be more sensitive directly
after epilation, avoid using irritating
substances such as deodorants with
alcohol.

Cleaning the epilation heads
5 After epilating, unplug the appliance

and clean the epilation head. First
remove the clip used (

) and

clean it with the brush.

6 To clean the tweezer element, use the

cleaning brush dipped into alcohol.
Clean the tweezers with the brush from
the rear side of the epilator head while
turning the barrel manually.

7 Remove the epilation head by pressing

the release buttons

on the left and

right and pull it off. Give the top of the
housing a quick clean with the brush.
Place the epilation head and your
preferred clip (

) back on the

housing.

Subject to change without notice.

This product conforms to the
European Directives EMC 89/336/
EEC and Low Voltage 73/23/EEC.

Please do not dispose of the
product in the household waste at
the end of its useful life. Disposal
can take place at a Braun Service
Centre or at appropriate collection
points provided in your country.

5395381_SE5370_S6-56 Seite 8 Mittwoch, 11. Oktober 2006 12:28 12