BellSouth A50 - Manual (Page 6)

Features & Functions
1. Page icon button (PAGE): Press to page the handset. The handset will ring
for about 25 seconds then end the paging automatically.
2. Charger indicator LED: Lights up when handset is placed on the base for
charging. (RED)
3. In use indicator LED: Lights up when the handset is in the TALK mode.
(RED)
4. Charging terminals / contacts: To charge the batteries inside the handset. For best
performance, clean periodically with a damp cloth only.
5. Telephone line connection jack: To connect to the telephone line jack.
6. Shaker plug: To connect to an optional vibrating shaker.
7. Ringer volume switch: Set the base ringer HI/MED/LO/OFF.
8. Adapter plug-in connection: To connect the AC adapter to the base.
Front View of Handset Controls
1. Visual Ringer indicator: A bright flashing light that flashes with each ring of
the telephone.
2. F button (FLASH/DELETE): Press to answer an incoming call if you have Call
Waiting. The “F” button is also used to cancel an action/entry or clear a stored
CALLER ID call.
3. MEMO button (PROGRAM): Press to store numbers in memory or to call a
number you’ve previously stored.
4. LCD display: The screen shows the activity and programming of your handset.
The CALLER ID feature is optional.
5. R/P button (REDIAL/PAUSE): Both the last number redial and the pause
feature. Press to redial the last number you’ve dialed (See page #18 for operating
instructions). To insert a pause while dialing (See page #18 for operating instruc-
tions) .
Top view Bottom view
(Diagram #1) – Location of Base Controls
4
1
3
2
8
6 7
5