Bose LIFESTYLE RC-18S - Manual (Page 4)

Deciding Where and How
4
En
g
lish
De
ut
sc
h
Fr
a
n
ç
a
is
Da
ns
k
Es
pa
ñ
o
l
Itali
a
no
Sv
en
ska
Ned
e
rlan
d
s
Deciding Where and How Setting up your expansion products
If you have purchased other Bose ® link compatible
products, you can pair them to work seamlessly with
your new remote. This allows you to command sound
from your LIFESTYLE
® system in an entirely different
part of your home.
To get an additional room of sound
It takes only a few steps to set up one additional room of
sound with Bose products. With batteries installed in the
RC-18S remote, you can then use it for control in the
same area with those products.
With a Bose SA-2 or SA-3 amplifier and speakers:
1.
Arrange and connect the speakers and amplifier as
instructed in the amplifier owner’s guide. (A Bose
® link
A cable is supplied with the amplifier only.)
2. Check the room setting on the amplifier, as instructed
in the owner’s guide that came with it. This setting
must be different from the main room remote.
3. Check the switch settings inside the battery compart-
ment of the RC-18S remote. These include:
• House code (switches 1-4): Must match the main
room remote control house code setting.
• Audio stream (switch 5): May be set like that of the
main room remote or be set to receive a different
audio stream instead. Set switch 5 in the RC-18S
accordingly.
• Room setting (switches 6-9): These must be differ-
ent from the main room remote and identical to the
room settings in the amplifier.
Note: Your RC-18S remote and the SA-2 or SA-3
amplifier switches are set at the factory with identical house
codes, with switch 5 set to command audio stream 2, and
with room switches set for use in Room B.
4. If your amplifier and remote switches do not match,
refer to “How to change the settings, as needed” on
page 15.