Caller id system operation, A. setting the ringer level, B. changing the language – BellSouth MH9915 User Manual

Page 28

Caller ID System Operation

TELEPHONE

Function

KEYPAD

MSG Waiting Delete: Clears current message waiting indication.

Area Code: This unit does not require any programming of an Area
Code. However, this option could be used to add the local Area Code
to numbers that were stored as 7-digits in the phone book and 10-
digit dialing is required in the local calling area.

NOTE: At any time during options programming you can quit and the settings
that you have changed will be saved. Press the button to quit
the options menu or let the options programming time out by not pressing
any TELEPHONE KEYPAD buttons for 20 seconds.

A. Setting the Ringer Level

1. Press and hold the button to enter the menu.

2. Press the button to change the setting. “HI” will begin flashing.

3. Press the SCROLL UP or DOWN button to toggle between HI, LOW, and

OFF.

4. When the desired setting is displayed, press and hold the /re/pa button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

5. Continue with programming or press the button to return to

STANDBY mode.

B. Changing the Language

1. Press and hold the button to enter the menu.

2. Press the button to go to the LANGUAGE programming option.

3. Press the button to change the setting. “ENGLISH” will begin

flashing.

4. Press the SCROLL UP or DOWN button to toggle between ENGLISH,

ESPANOL, and FRANCAIS.

5. When the desired setting is displayed, press and hold the /re/pa button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the button to return to

STANDBY mode.

oper

voice mail/menu

flash/edit

abc

save

voice mail/menu