Chargers, Charge the battery – Nokia BLUETOOTH HEADSET BH-212 User Manual
Page 4

ENGLISH
key (1), multifunction key (2),
indicator light (3), charger connector
(4), earpiece (5), and microphone (6).
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.
Chargers
This device is intended for use when
supplied with power from the following
chargers: AC-3, AC-4, AC-5, and DC-4.
Warning: Use only chargers
approved by Nokia for use
with this particular
enhancement. The use of any other types
may invalidate any approval or warranty,
and may be dangerous.
When you disconnect the power cord of
any enhancement, grasp and pull the
plug, not the cord.
Charge the battery
Before charging the battery, carefully
read “Battery information”.
1. Connect the charger to a wall
outlet.
2. Connect the charger to the headset
(7). During charging, the red
indicator light is on and the
headset cannot be used. Charging
the battery fully may take up to 2
hours.
3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset and the wall
outlet.
If the headset was connected to
your phone before charging, the
headset connects to it again.