Nokia Bluetooth Headset BH-201 - Manual (Page 7)

ENGLISH
Change the earbud
The headset may be supplied with
earbuds in different sizes. To change
the earbud, pull the current earbud
from the headset (9), and push the
new earbud into place, with the wider
end first.
Call handling
To make a call, use your phone in the
normal way when the headset is
connected to your phone.
If your phone supports last number
redialing with the headset, press the
answer/end key twice briefly when no
call is in progress.
If your phone supports voice dialing
with the headset, press and hold the
answer/end key when no call in
progress, and proceed as described in
the user guide of your phone.
To answer or end a call, press the
answer/end key. To reject an incoming
call, press the answer/end key twice.
To switch the call between the
headset and a compatible phone,
press and hold the answer/end key.
To adjust the headset volume, press
the volume key up or down.
Clear the settings or reset the
headset
To clear the settings, press and hold
the power key and the answer/end key
over 10 seconds.
To reset the headset if it does not
function properly, although it is
charged, plug the headset into a
charger, and press the power key and
the answer/end key at the same time.