Nokia DT-901 - Manual (Page 4)

Switch the charging plate on or off
Use the charging plate only with the supplied power supply.
Switch on
1 Connect the charger cable to the power supply.
2 Plug the power supply into a wall outlet.
You can keep the plate plugged into to the wall outlet even when you're not charging
your phone. The plate uses hardly any power when it's not charging.
Switch off
Unplug the charger from the wall outlet.
Charge your device
1 Make sure that there's nothing on the charging plate.
2 Place your phone or other compatible device on the charging plate. When the
white indicator light goes off, the battery is fully charged.
4