Nokia MD-51W - Manual (Page 7)

Before using NFC, unlock the phone screen and enable its NFC function.
If your phone doesn't support NFC, pair the speaker manually.
To close the connection, touch the NFC area of the speaker with the NFC area of your
phone again.
Pair the speaker manually
You can pair your speaker manually with Bluetooth.
1 Switch on your speaker and phone or other compatible device.
2 If you've previously paired your speaker with another device, press and hold for
2 seconds.
3 Within 3 minutes, switch Bluetooth on in your phone, and search for Bluetooth
devices.
4 Select the speaker from the list of found devices.
5 If asked, enter the passcode 0000.
Clear the pairings
You can clear the paired devices list on your speaker.
Switch the speaker off, then press and hold and the power key for 5 seconds.
The white and red indicator lights alternate.
Pressing and holding and power also restores factory settings in your speaker.
After you've cleared the pairings, you must pair the speaker before you can use it
again. When you switch the speaker on, it goes into pairing mode automatically.
If the paired devices list on your speaker is cleared, also clear that pairing in your
device before pairing again.
Listen to music
Play music
Connect a phone or other compatible device to your speaker, and play your favorite
music.
7