Nokia MD-12 - Manual (Page 9)

Connect your speaker manually
If your device doesn’t support Bluetooth, you can use a standard audio cable (3.5 mm) to connect
your speaker.
Make sure your speaker is switched on.
Connect a standard audio cable (3.5 mm) to the audio connector on your speaker and on your device.
When you connect your speaker using a cable, Bluetooth is switched off automatically, and the
Bluetooth indicator light stays on.
When you disconnect the cable, Bluetooth is switched on, and the speaker connects automatically to
the last connected Bluetooth device.
Indicator lights
Wonder what the different lights on your speaker mean?
Battery indicator lights:
One long flash Switching on or off
Continuous Charging
Off The battery is fully charged
Bluetooth indicator light:
Flashing quickly Pairing
Flashing slowly Connected
Flashing twice repeatedly Connection is lost
Continuous Bluetooth is switched off
© 2014 Microsoft Mobile. All rights reserved. 9