Bissell CLEAN VIEW 74T5 - Manual (Page 14)

Item Part No. Part Name
1 32074 Style 7/9/10/12/14 Drive Belt (2-Pack)
2 203-1297 Standard Headlight Bulb
3 203-1056 Crevice Tool
4 203-1059 Combination Dusting Brush/Upholstery Tool
5 203-1068 Extension Wand
6 203-1216 Wire Reinforced Twist ‘n Snap Vacuum Hose ( Select Models Only)
7 203-5624 Wide Brush Roll
8 32064 Style 9/10/12 Inner & Outer Circular Filter Set
9 32065 Style 9/10/12 Inner Circular Filter only
10 3205 Style 12 HEPA Media Filter*
11 203-1215 Pre-Motor Filter
12 203-7170 TurboBrush Bracket
13 203-7196 TurboBrush
w w w . b i s s e l l . c o m
T
roubleshooting
14
1
6
11
2
7
12
3
8
13
4
9
5
10
Visible dirt escaping from cleaner continued
Possible causes Remedies
3. Dirt container installed incorrectly 3. Position correctly and lock into place
4. Filter cup installed incorrectly 4. Remove dirt container and make sure filter
cup is fully attached
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
R
eplacement parts -
*The Filter Media, not the vacuum as a whole, complies with the High Efficiency
Particulate Air (HEPA) filter specification (EN 1822-1:2009).