Memory expansion, Sound system – Toshiba Satellite L30 (PSL30) User Manual
Page 114

User’s Manual
9-11
Troubleshooting
USB
Also refer to your USB device’s documentation.
Memory expansion
, for information on installing
memory modules.
Sound system
Refer also to documentation for your audio devices.
Problem
Procedure
USB device does not
work
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows
®
XP
documentation for information on checking the
drivers.
If problems persist, contact your dealer.
Problem
Procedure
The computer hangs up
and issues sounds.
(A long beep, three
short beeps, three short
beeps, and then a long
beep.)
Make sure the memory module installed in the
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
1. Turn off the power.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the memory module.
5. Replace the battery pack and/or connect the
AC adaptor.
6. Turn on the power.
If problems persist, contact your dealer.
Problem
Procedure
No sound is heard
Check the software volume settings.
Make sure the headphone connection is secure.
If problems persist, contact your dealer.