Blaupunkt AntaresT60 - Manual (Page 18)

18
TRAFFIC RADIO RECEPTION CD CHANGER OPERATION
Traffic radio reception
Switching priority for traffic
announcements on/off
➮
Press TA.
When traffic announcement priority is
switched on, TA will light up in the display.
Note:
You will hear a warning beep,
●
if you leave the reception range of the
traffic radio station you are listening to
●
if you leave the reception range of the
traffic radio station you are tuned into
while listening to a CD and the automatic
seek tuning function is unable to find an-
other traffic radio station
●
if you switch from a traffic radio station to
a radio station that does not broadcast
traffic information
In this case, either switch off traffic announce-
ment priority or switch to a radio station that
broadcasts traffic information.
CD changer operation
Selecting the CD changer mode
If the Radiophone is currently in the telephone
or radio mode,
➮
press SRC repeatedly until the CD
changer functions appear in the display.
Note:
The telephone mode has priority. If the phone
is in use, you cannot switch to the radio or
CD changer modes.
Selecting a CD
There are different ways in which you can
select a CD.
Selecting the next CD up or down
➮
To select the next CD up or down, press
or once or as often as necessary.
Selecting the CD directly using the
numbers buttons
➮
Press the corresponding numbers button
from 1 - 9.
Selecting a CD directly from the menu
➮
Press MEM.
A menu listing the CDs available will appear
in the display.
➮
Press / to select the desired CD.
➮
Press OK to begin CD playback.
Selecting a track on a CD
➮
To select a track up or down on the CD
currently playing, press or once or
repeatedly as required.
Fast Cue/Review (audible)
For fast Cue or Review
➮
press and hold down or until Cue or
Review begins.