Bogen RM-350D - Manual (Page 8)

Operation
Power
Press the front panel POWER switch to apply power. Adjust
the volume to the appropriate level using the amplifier volume
control.
To Select a Band
Press the button marked BAND. The current band appears on
the display: FM1, FM2, FM3, AM1 or AM2.
You can preset up to six stations on each band for a total of 30
preset stations (18 FM and 12 AM).
To Tune a Station
Press the UP or DOWN buttons.
To Preset Stations
1. Select a band and tune the first desired station.
2. Press one of the “M” buttons; for example, M1 (The preset
number appears on the display as
C H 1
).
3. Continue pressing the “M” button until the program material
from the speaker stops for a second and then resumes.
This indicates that the preset is stored.
4. Tune the next station and repeat Steps 2 & 3 for the 2
nd
through 6
th
preset.
To Scan Preset Stations
1. Select a band. The first preset station (
C H 1
) will appear on
the display.
2. Press the button marked MSCAN. Each preset station will
play for 5 seconds in turn while scanning.
3. To stop the scanning, press the “MSCAN” button again.
Program Selection
Use the AUX/TUNER button to select program from the tuner or
aux source. Push in for Aux program. Push out for Tuner pro-
gram
8