Toshiba JournE Air800-801 - Manual (Page 10)

EN-10 User’s Manual
Built-in battery (available on Journe Air 801 only)
The digital frame is equipped with a built-in lithium polymer battery. To
check the battery status, enter SETTINGS mode and then select Status.
To charge the battery, follow the steps below:
1. Connect one end of the AC power adapter to the power jack on the left
side of the frame.
2. Connect the other end to a power outlet.
3. Place the photo frame horizontally or vertically on a stable surface,and
then keep the power connected until the battery is fully charged.
When the battery time is 5 minutes left, a warning
message will show on the screen again and the frame
will shut down automatically. Charge the battery as
described above.
The fully charged battery usually lasts about 50
minutes,depending on your use and settings.
Power system and plug types may vary depending on
your country/region.
Do not disassemble or modify the battery.
NOTE
CAUTION