Toshiba Compact Optical Mouse - Manual (Page 6)

Compact Optical Mouse
EN-6 Quick Start Guide
Connecting the Mouse to the computer
1. Insert the USB connector into any USB port of your computer.
(Sample Image) Connecting the Mouse to the Computer
2. After a short delay, the mouse will be detected and then you can
use it.
Troubleshooting
Mouse does not work upon installation.
Try one or more of the following:
n Make sure you have installed the mouse correctly.
n Make sure the cable is plugged into the right USB port.
n Unplug the mouse and then plug in the mouse again. Make sure
that the mouse has been detected by the operating systems
properly.
Refer to your computer documentation for the correct port
configuration.
3D_Compact optical mouse.book Page 6 Thursday, November 6, 2008 12:57 AM