BUSH LED LCD TV IDLED2601 - Manual (Page 9)

INSTALLATION
-8-
STEPS:
PC
Ensure the TV and your computer are both set
to power off before your connect.
1.Connect the VGA Input & PC Audio Input as
above.
2.Connect power supply again to your TV set.
3.Turn on the TV and then press the SOURCE
Buttons to select PC mode.
4.Then turn the PC power on.
ANTENNA
Note:
Aerial Connections: IEC(female).
Input Impendance: 75 unbalanced.
Rear Sockets
Outlined below is the Rear Sockets provided -
AV Input, R/L Audio Input, YPbPr Input and HDMI2 Input. AC POWER INPUT,
Note: 1. The AV Input and YPbPr Input share one audio channel.
2. When the HDMI2 Input receives a DVI signal, the audio signal is received
from the R/L audio input.
Side Sockets
Outlined below is the Side Sockets provided -
HDMI1 Input, USB Input, PC Audio Input, AV Output, VGA Input and RF Input.
Note: When the VGA Input receives a DVI signal ,the audio signal is received from the
PC Audio Channel.
USB HDMI1 PC AUDIO AV L R
AV OUTPUT
VGA RF
AV L R AV L R Y Pb Pr Y Pb Pr HDMI2
100-240V~ 50/60Hz
AC-INPUT
USB HDMI1 PC AUDIO AV L R
AV OUTPUT
VGA RF