BUSH DAB+ Digital Radio BR08DAB - Manual (Page 7)

Bush BR08DAB
Getting Started
Carefully remove your Radio from the box. We recommend
keeping the packaging for future reference.
Setting up
It is important that you consider carefully in advance where
your radio will be situated and make sure that it is:
 On a flat and stable surface
Note: Never place your radio on antique or polished surfaces.
 Within 1.5 metres of a power socket
 Where you can fully extend the telescopic aerial
Step 1: Connect the mains power lead into the socket on the
right hand side of the radio and plug the power adaptor into the
mains power wall socket and switch on.
Step 2: Fully extend the telescopic radio aerial in a vertical
position to obtain the maximum signal strength.
Step 3: Press the power switch on the front of the radio, to the
right of the display. The display will switch on and for the initial
use; it will automatically begin to scan for DAB+ radio stations.
A progress bar will show the progress of the scan and the
number of stations found during the scan will be displayed.
When the scan is complete your radio will select the first
available station and begin to play. Stations are listed in
numerical and then alphabetical order by default.
Note: The DAB+ radio station list is stored in the memory and
so the next time you switch your radio on, the station search
does not take place.
Step 4: Inserting the batteries (optional). Before installing the
batteries (not included) please ensure that the DAB+ Radio is
unplugged from the mains power supply.
On the back of the radio, press in and push down on the two
ribbed triangle areas to remove the battery cover. Insert 4 x
1.5V AA-size batteries, making sure to note the „+‟ and
„-„markings and position the batteries the correct way around.
Replace the battery cover, making sure it „clicks‟ shut.
6