Black & Decker EC70 - Manual (Page 6)

4. To avoid dripping or splatter, pull the cut lid out
before removing the can. (Figure G)
5. To remove an opened can, hold it with one
hand and push the Operating Switch up with the
other. (Figure H) The Retractable Magnet will lift
automatically.
CAN OPENING TIPS
■ If there is a bump or dent in the rim of the can,
open the other end or start cutting just beyond
the dent.
■ Cans with heavy seams, uneven rims, or odd
shapes may stall the Can Opener. Turn the can
slightly by hand to help the cutting action.
NOTE: If the Cutting Blade needs to be replaced,
the Can Opener must be returned to a Black &
Decker Inc., Household Appliance Company-
Owned or Authorized Service Center. A list of the
Company-Owned Service Centers can be found on
the insert included with this book.
TO OPEN BOTTLES
1. The bottle opener is located at the bottom of the
unit and requires a side-to-side motion. Use it to
remove metal bottle caps only.
2. To open a bottle, grasp it and position the cap
under the metal “hook” in the bottle opener. Pull
sideways to the right. (Figure I) “
IMPORTANT: Be sure the “hook” is not under the
bottle neck or the glass may break.
TO OPEN BAGS
1. The bag opener is located at the right side of
the Mounting Bracket:
2. To open a bag, grasp it with both hands and pull
the top of the bag from back to front through the
slot on the Bracket. (Figure J)
CAUTION: If the plastic guide over the cutting slot
breaks off, the blade inside will be exposed causing a
cutting hazard. If that occurs, or if the blade becomes
dull, remove the Mounting Bracket and bring or send
it to a Black & Decker , Household Appliance
Company Owned or Authorized Service Center.
6
Figure H
Start
Release
Figure I
Start
Release
Figure J
Start
Release
Figure K
Start
Release
Cover